Servicing Maitland & the entire Hunter RegionMon–Fri 7am–5pm · Sat by appointment · (02) 4005 2903
(02) 4005 2903
Drone photo of a dark grey Colorbond hip roof on a single-storey home next to an old tile roof in Tenambit, NSW

Costs · 7 min read

How much does a roof replacement cost in Maitland?

Published 2026 cost guides, what pushes a Maitland re-roof up or down, and how NSW contract and deposit rules change as the price climbs.

Key points

  • Newcastle guides put COLORBOND® re-roofing at $76–$170/m² (Sept 2026).
  • Tile removal, asbestos, scaffold and access add the most to a price.
  • Jobs over $20,000 need a full contract and HBCF insurance in NSW.
  • Only an on-site measure gives a real figure; guide ranges are not quotes.

What the published cost guides say

There's no single price for a new roof, but there are decent public benchmarks. The closest to us is whatsthedamage.com.au's Newcastle guide (Sept 2026), which puts COLORBOND® steel re-roofing at $76–$170/m² and full single-storey replacements at $9,500–$23,750. The same guide puts an average three-bedroom Colorbond re-roof at $17,100 and notes prices rose 5.1% year on year. Here's how that sits next to other published ranges:

ItemPublished rangeSource (date)
Colorbond re-roof, per m²$76–$170/m²whatsthedamage Newcastle (Sept 2026)
Full replacement, single-storey$9,500–$23,750whatsthedamage Newcastle (Sept 2026)
Full replacement, two-storey$14,250–$38,000whatsthedamage Newcastle (Sept 2026)
Colorbond installed, national$80–$150/m²Yellow Pages (May 2026)
150–200 m² home, total$13,000–$18,000Yellow Pages (May 2026)
Old roof removal and disposal$20–$50/m²Yellow Pages (May 2026)
Scaffolding$2,000–$8,000Yellow Pages (May 2026)
Tile-to-Colorbond conversion, typical house$20,000–$35,000whatsthedamage Sydney (Sept 2026)
Licensed asbestos roof removal$50–$80/m²whatsthedamage Sydney (Sept 2026)

These are aggregator figures, not our prices and not a quote. They're useful for budgeting, but every roof we price is measured on site first.

Why two similar houses get very different prices

Two brick-veneer homes in the same Rutherford street can come in thousands of dollars apart. The main reasons are:

  • Roof area, not floor area. A steeper pitch, wide eaves and a verandah all add square metres of sheeting.
  • Complexity. Hips, valleys, dormers and skylights mean more flashings, more cutting and more labour than a simple gable.
  • Height and access. A two-storey home, or a block with no side access, often needs scaffold or edge protection. Yellow Pages puts scaffold alone at $2,000–$8,000.
  • What's coming off. Stripping old iron is quicker than lifting and carting concrete tiles. Anything containing asbestos needs a licensed removalist, which changes the job entirely.
  • What's underneath. Rotten battens, rusted purlins or a sagging frame have to be fixed before new sheets go on.

Our free roof replacement cost calculator lets you play with roof size, storeys and the existing material to see how these factors move the range.

Tile-to-metal and asbestos jobs cost more

Swapping tiles for steel is a bigger job than a like-for-like re-sheet. The whatsthedamage Sydney guide (Sept 2026) itemises a 180 m² two-storey conversion at $37,500: tile removal and disposal $6,500, battens $1,200, sarking/anticon $1,900, Colorbond Ultra supply and install $19,800, gutters and fascia $3,400, ridge capping and flashings $2,100 and scaffold $2,600. Removal and new battens alone are a fifth of that bill. We cover the process in our tile-to-metal conversion guide.

Asbestos cement ("fibro" or "super six") roofs are common on older Hunter homes. The whatsthedamage asbestos guide (Sept 2026) puts licensed removal at $50–$80/m², and removal plus a new Colorbond roof on a typical home at $25,000–$45,000. On top of that come tip fees of $800–$2,000 and air monitoring of $400–$900. In Maitland, asbestos goes to the Mount Vincent Road facility by booking only.

Commercial building roof part-stripped during replacement, showing old sheeting and open purlins in Rutherford, NSWBefore
Long commercial building with a full new metal roof and roof ventilators seen from above in Rutherford, NSWAfter
Commercial building re-sheeted · Rutherford

Extras worth pricing at the same time

While the scaffold is up and the roof is open, it's usually cheaper to sort out the bits around it rather than coming back later. Published ranges for common add-ons:

We can quote these on the same visit. See gutters and downpipes and skylights and ventilation.

How the price changes your contract and insurance

In NSW, the price of the job decides the paperwork. According to the NSW Consumer Building Guide:

  • Work over $5,000 and up to $20,000 needs a written "small jobs" contract.
  • Work over $20,000 needs a full home building contract.
  • The most you can be asked to pay as a deposit before work starts is 10%.

Residential work over $20,000 also needs home building compensation (HBCF) cover through icare. Most full re-roofs land above that line, so expect a full contract and an HBCF certificate before you pay anything. If a quote asks for a big upfront payment, that's a red flag. Our guide to hiring a roofer in NSW has the full checklist.

How long it takes, and planning around the weather

Time on site is part of the cost, and the weather has a say in it. The whatsthedamage.com.au metal roof guide (Sept 2026) says a like-for-like metal re-roof typically takes two to three days. Tile removal, asbestos, re-battening and complex roof shapes all add to that.

Maitland's Bureau of Meteorology station records about 85 rain days a year and 838 mm of annual rain, so a few weather days are normal on any roofing schedule. Some practical points that help keep your job, and your budget, on track:

  • We only open what we can close. Old sheets come off in sections that can be covered or re-sheeted the same day, so a storm doesn't turn into a ceiling repair.
  • Book early for spring and summer. Storm season brings a rush of urgent repair and insurance work across the Hunter.
  • Clear the access. Room for a skip or trailer and a clear path down one side of the house saves labour time.
  • Plan for surprises. Rotten battens and rusted purlins often can't be seen until the old roof is off. A good quote tells you how these will be priced if they're found, so there are no arguments halfway through.

Getting a figure you can actually budget on

An online range gets you in the ballpark. A written quote based on a measure gets you a number. When we quote a Maitland roof we:

  1. Measure the roof on site and check pitch, access and the condition of battens and gutters.
  2. Identify the existing material, including anything that may contain asbestos.
  3. Talk through profile, colour and steel grade for your location.
  4. Give you a written, itemised quote, so you can compare like with like.

The measure and quote are free and there's no obligation. If you want a rough idea first, try the cost calculator, then book a measure or call (02) 4005 2903. More detail on what's included is on our metal roof replacement page.

Written and checked by a licensed roofer

This guide was written by the Maitland Metal Roofing Solutions team and reviewed by our licensed roofing contractor (NSW Contractor Licence 463604C). Every figure links to its source and we say when it's a guide rather than a quote. See how we write our guides.

Last reviewed

FAQs

How much does a new Colorbond roof cost in Maitland?
Published guides give a starting range. whatsthedamage.com.au's Newcastle guide (Sept 2026) puts Colorbond re-roofing at $76–$170 per square metre, and single-storey replacements at $9,500–$23,750. Your price depends on roof size, pitch, access and what has to come off. We measure every roof on site and give a free written quote.
Is it cheaper to replace a metal roof than a tile roof?
Usually, yes. Stripping old metal sheets is quicker than lifting, carting and disposing of tiles, and the battens can sometimes stay. A tile-to-metal conversion often needs new battens and sarking too. whatsthedamage.com.au's Sydney guide (Sept 2026) puts a typical tile-to-Colorbond conversion at $20,000–$35,000.
How much deposit can a roofer ask for in NSW?
Under NSW home building rules, the maximum deposit you can be asked to pay before work starts is 10% of the contract price. Jobs over $20,000 also need a full written contract and HBCF insurance in place before the builder takes a deposit. Be wary of anyone asking for more money upfront.
Does a roof replacement quote include gutters?
Not always, so check the scope. Some quotes cover sheets, flashings and ridge capping only. We list gutters, downpipes, fascia, sarking and any ventilation as separate line items so you can see what each part costs and decide what to replace now while access is set up.

Ready for a roof that's done properly?

Free on-site measure and a written, itemised quote. No obligation.

Call nowFree quote